Skip to navigation Skip to main content

Home / Machine Guarding Products / Machine Guarding Accessories

Machine Guarding Accessories

Troax’s machine guarding accessories make it possible to adapt and customise your machine guarding solution on-site. Cut profiles can be used to adjust the height and width of panels and the edge cover for covering cutouts in the mesh. The Snapper quickly joins panels to one another, and the kick plate infills the gap between the panels and the warehouse mezzanine floor. A cable wire tray is easily added to the guard, either fixed to the top of the posts or at any height with the Smart Fix bracket. Add our functional bonding kit for earthing if you have problems with leakage current. PC infill solutions, where a polycarbonate sheet is fixed to a mesh panel to cover for splash risks, are available together with gap covers or foam infill to cover the gaps between panels and posts. Our comprehensive range of machine guarding accessories makes it possible to create fully bespoke systems that are suited to your requirements.

Wire Tray System

The wire tray console system is easily fit to Troax machine guard.

Smart Post

Integrates push button controls and cabling to the post.

Smart Splice

Smart Splice is a patent pending design that simplifies high assembly.

Kickplate

Use the kick plate to infill the gap between the panels and the warehouse mezzanine floor.

Panel Curve

For machine guarding solutions that require round corners, the Panel Curve allows you to seamlessly integrate a rounded edge into your machine guard design, ensuring complete coverage and safety.

Panel Flexi

The Panel Flexi is an infill panel that complements the ST20 mesh installations, offering flexibility in design without compromising on safety.

Snapper

The Snapper adjoins two panels and can be used to replace a post.

Edge cover

Edge cover is a versatile solution for covering sharp edges after cutting the mesh for access.

Gap Cover

The gap cover infills the gaps between the panels and the posts.

Foam Infill

With the foam infill, the gap between the panels and posts are covered.

PC holder

The PC holder fixes a polycarbonate infill sheet to the mesh panel, to withhold liquids and small parts.

Extension bracket

With the extenstion bracket you can extend the standard 2,200 mm and 3,000 mm posts in height.

Functional Bonding

The functional bonding kit creates an electrical bonding between panels and posts, solving problems with leakage current.

Door Closer

Mechanical door closer for the single hinged doors.

Tubes

Add tubes to make easy adjustments on site.

Door Frame Fixings

With the door frame fixings and a 60x40 tube, you create a door frame for the single hinged door.

Power Door

Add-on motor for automated single sliding doors.

Light grid /Light curtain fixings

With these special fixings you can easily attach a number of varous light grids or light curtains to the Troax 60x40 posts.

Cut Profiles

The cut profiles make it possible to easy adjust the panels to exact requested height and width on site.

Handle with bracket

The plastic handle can easily be mounted directly to the mesh-, PC- or steel sheet panel.